Pinholes in NIR and UVA

Using the E-M1 converted to full spectrum with the Pinhole Pro objectives is possible. Using a 58 mm NIR filter (Hoya R72) attached to the front of the 11 mm Pinhole Pro S11 worked fine, with no increase in vignetting. Using the StraightEdgeU 52 mm or Baader U-filter 2″  with a step-down ring blocked the corners of the image completely. The original 26 mm Pinhole Pro suffers a lot less from vignetting and can be used with these filters of smaller diameter than the front thread of the lens without problem.

Even if pinholes are simply holes, and consequently do not absorb radiation, their very small apertures mean that exposure times need to be very long in the UVA, even in bright light.

The photographs below were taken yesterday between 16:50 and 17:10.

OLYMPUS DIGITAL CAMERA
26 mm Pinhole Pro, f:173 60 s, StraightEdgeU filter.
OLYMPUS DIGITAL CAMERA
26 mm Pinhole Pro, f:104 0.6 s, Heliopan RG695 (Schott glass) filter.
OLYMPUS DIGITAL CAMERA
26 mm Pinhole Pro, f:104 1 s, Heliopan RG780 (Schott glass) filter.

The photographs were white-balanced in PhotoNinja on the clouds. None of them have been converted to monochrome, but using the long pass filter with longer cut-off wavelength resulted in extremely faint false colour.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s